|
Resources required:
Tea light cups
Wax appropriate for tea light candles
Zinc core wicks, pre waxed
Color additive
Scent additive
Double boiler setup (melting pot)
Heat source
Organized work area
(1) Add required amount of water to the bottom container or pot of your double boiler and place on the heating source.
(2) Put the tea light wax in the melting pot and place the thermometer into the pot (laboratory thermometer with clip works great). Apply the heat and add additional water if necessary using caution to keep water out of the wax pot.
(3) Heat the wax to 175f temperature adding color while heating. Once to the temperature, remove from heat and add scent if desired. Gently stir the wax to blend the color and fragrance. Over stirring can add bubbles to the wax.
(4) Pour the wax into the cups approximately 1/16 of an inch from the top.
(5) Insert the prepped wick centered in the cup.
(6) Let the tea lights cool completely and trim the wick or wicks and let stand for 12 to 24 hours before burning.
|
